Why fleets connect Teltonika to Traknova
Most operators who run Teltonika hardware end up managing devices through a basic OEM portal that was never designed for fleet operators. You get position data but not much else. Geofences are limited, trip reports take too long to pull, and there is no driver behaviour layer. Switching platforms feels risky because you have invested in the hardware. Traknova fixes that by sitting on top of your existing Teltonika GPS trackers and giving you a proper fleet management layer without touching anything on the vehicle itself.
What you get
Keep your existing Teltonika hardware
No new devices to buy. Register your FMB and FMC IMEIs in Traknova and they appear in the dashboard within minutes of pointing the data endpoint. Works with any protocol-compatible model.
Live GPS tracking
Real-time position updates from every Teltonika tracker on a single map. Filter by vehicle, group or driver. Position updates are as frequent as your device is configured to send them.
Trip history and odometer
Every trip is logged automatically with start and end points, duration, distance and driving events. Build mileage reports for any date range without touching individual devices.
Driver behaviour scoring
Harsh braking, acceleration and cornering events from compatible Teltonika models feed into driver scorecards. Identify your highest-risk drivers without a separate analytics tool.
Geofences and instant alerts
Draw zones around depots, customer sites or restricted areas. Receive instant alerts when a vehicle enters or exits. Works across all connected Teltonika FMB and FMC devices.
CAN data where available
FMC and select FMB models with CAN adapters pass through fuel level, engine RPM and fault codes. These appear alongside position data in the Traknova dashboard.
Supported Teltonika models
| Model | Notes |
|---|---|
| FMB120 | Entry-level compact tracker, GPS and GLONASS |
| FMB125 | Bluetooth-enabled, driver ID support |
| FMB130 | Advanced I/O, temperature sensor support |
| FMB140 | 4G LTE, CAN data ready with adapter |
| FMB920 | OBD-II plug-in tracker |
| FMC125 | 4G LTE Cat 1, Bluetooth, advanced features |
| FMC130 | 4G LTE, extended I/O |
| FMC640 | 4G LTE, CAN bus, high-end fleet |
| FMM125 | 4G LTE Cat M1/NB-IoT variant |
Data available in Traknova
- Live GPS position (latitude, longitude, altitude)
- Speed and heading
- Ignition on/off events
- Odometer and trip distance
- Harsh braking, acceleration and cornering events
- Geofence entry and exit timestamps
- Battery voltage
- Engine RPM (CAN-equipped models)
- Fuel level (CAN-equipped models)
- Engine fault codes / DTC (CAN-equipped models)
- Driver ID via iButton or Bluetooth (compatible models)
How to connect Teltonika to Traknova
Setup time: Around 10 minutes per device for the first batch. Faster once you have a saved configuration profile to apply.
- 1Add your Teltonika device IMEIs to your Traknova account under Fleet > Add Device.
- 2Open Teltonika Configurator on your laptop and connect to each device via USB or Bluetooth.
- 3In the GPRS section, update the Server Address to the Traknova endpoint and set the port shown in your account settings.
- 4Save the configuration and reboot the device. Live data appears in Traknova within a few minutes.
- 5Repeat for each device, or use Teltonika batch configuration for larger fleets to speed up the process.
Built for Taxi and PHV operators, Car rental companies, Logistics operators
Taxi operators running Teltonika hardware can switch to Traknova without reinstalling a single device. Driver behaviour, zone alerts and trip logs give operators the data they need for compliance and performance management in one place.
Car rental businesses use Teltonika fleet management in Traknova to track vehicle utilisation, catch unauthorised use outside booking windows and manage returns more accurately using real odometer data from the tracker.
Logistics fleets with large Teltonika estates use Traknova to get route compliance, ETA visibility and driver scorecards in one platform, replacing several disconnected tools with a single dashboard.
Teltonika fleet management FAQs
Yes. Traknova supports Teltonika FMB and FMC series trackers. You keep the hardware you have already installed. The only change is updating the server address in Teltonika Configurator to point at Traknova. Most operators complete this in under 15 minutes per device.
Traknova is designed for operators who have already invested in Teltonika GPS trackers and do not want to replace working hardware. The integration is a server-side redirect: you update the data endpoint in Teltonika Configurator, and live data begins flowing into Traknova automatically. Nothing changes on the vehicle.
Teltonika makes some of the most widely deployed GPS trackers in the UK market. The FMB and FMC ranges cover everything from basic position tracking to full CAN bus data, Bluetooth driver ID and multi-I/O configurations. Traknova accepts all of this and surfaces it in a dashboard built around how fleet operators actually work.
Operators commonly switch to Traknova because the Teltonika tracker software they were using previously lacked proper driver scoring, limited their geofence options or made reporting too manual. Traknova solves all of that without asking you to change the hardware you already rely on. Keep your Teltonika kit. Change your platform.
