
Teltonika KeepCam vs Hikvision G40: Fleet Dashcam Comparison 2026
Charles Alexis
The Teltonika KeepCam and the Hikvision G40 aim at the same job, but they come from very different starting points.
Why compare these two
The Hikvision AE-DI2032-G40 is an established 4G industry dashcam that’s widely available in the UK. The Teltonika KeepCam is brand new, launched in October 2026.
Both are aimed at light commercial fleets. Both do 4G live video, GPS tracking and AI for the road and the driver. Both support up to 3 cameras. If you’re choosing a camera for cars, taxis or vans this year, these two will likely end up on the same shortlist.
Hikvision comes from the CCTV world. Teltonika comes from vehicle tracking. That background shows in where each camera is strongest.
Side-by-side
| Teltonika KeepCam | Hikvision G40 | |
|---|---|---|
| Total channels | Up to 3 (1 built in + 2 modules) | Up to 3 (1 built in + 2 extension) |
| Extension cameras | AHD modules | TVI (2 x 720P or 1 x 1080P) |
| Front resolution | Check datasheet | Up to 1080P |
| ADAS | Collision warnings, front camera | FCW, PCW, LDW, TSR, HMW, traffic light, car leaving |
| DSM | Optional IR DSM module | Phone, smoking, fatigue, inattention, seatbelt, sunglasses, camera blocked |
| Storage | Up to 1 TB | Dual TF cards, up to 512 GB each |
| Power | 9 to 36 V | 11.8 to 16 V or 23.5 to 36 V |
| Power-cut protection | Supercapacitor backup | Not specified |
| Setup | Wi-Fi hotspot + TCT | Wi-Fi AP + mobile app |
| Inputs | 3 DIN, 1 DOUT, RS232 | 2 alarm inputs, RS232 |
| Driver ID | Up to 200 drivers | Not specified |
| SIM | Check with supplier | Industrial SIM required |
| Weather rating | Check datasheet | IP4X, not waterproof |
Video and recording
The G40 records up to 1080P at 25fps on its main camera, with H.265 compression to keep file sizes and data use down. Extension cameras record at 720P, or you can run a single 1080P extension instead of two 720P ones.
Teltonika hadn’t published full resolution figures for the KeepCam at the time of writing. Check the datasheet before comparing image quality directly. In practice, for insurance evidence, how well the camera handles night driving and glare matters more than the headline resolution.
Both cameras overwrite old footage automatically once storage fills. If that’s caught you out before, our guide to why dash cams keep overwriting footage explains how to plan for it.
AI features
Hikvision G40
Hikvision publishes a long and specific list. On the road side: forward collision, pedestrian collision, lane departure, traffic sign recognition, headway monitoring, traffic light detection and a warning when the car in front pulls away.
On the driver side: phone calls, smoking, inattention, fatigue, camera blocking, infrared-blocking sunglasses and not wearing a seatbelt. Driver monitoring uses a separate infrared DSM camera, which Hikvision lists as an accessory.
Teltonika KeepCam
Teltonika’s launch material focuses on forward collision warnings that work in darkness, rain and fog, plus driver monitoring for distraction, fatigue and phone use through an optional infrared DSM module.
The KeepCam’s advantage is control. You can tune thresholds, detection duration, notification intervals and AI sensitivity in TCT. That matters, because a camera that sends too many alerts gets ignored. See our guide to tuning AI alerts.
Where the Hikvision G40 is stronger
Published AI detail. You know exactly which events it detects. That makes it easier to match the camera to your safety policy.
Maturity. The G40 has been on the market long enough to have firmware releases and installer familiarity behind it. The KeepCam is a first-generation product.
Known specs. Resolution, operating temperature (-20°C to 60°C), size and weight are all published.
Storage flexibility. Dual TF cards mean you can split or mirror storage. Pick the right card, though. Our best SD card for dash cams guide covers what works in fleet use.
Where the Teltonika KeepCam is stronger
Tracking pedigree. Teltonika is primarily a tracking company. If you already run Teltonika trackers or a platform that supports them, the KeepCam slots into a familiar setup.
Power protection. Supercapacitor backup keeps the camera alive long enough to close recordings if power is cut in a crash. That’s exactly when you need the footage most.
Wider voltage range. 9 to 36 V in one range covers cars, vans and trucks without worrying about which band you’re in.
Inputs and outputs. Three digital inputs plus a digital output that can drive an immobiliser relay gives you more room for turn signals, door sensors and security accessories.
Driver ID. Recognising up to 200 drivers is a real advantage for shared vehicles, rental fleets and PHV operators where drivers change cars.
Things to check on either camera
Platform support. The G40 is built around Hikvision’s HCP platform. The KeepCam relies on Teltonika-compatible platforms. Make sure the camera works with the software your team will actually use. Traknova already integrates with both Hikvision and Teltonika dashcams.
SIM and data. The G40 requires an industrial SIM, and Hikvision is clear that standard SIMs aren’t supported. Budget for live streaming data on both. If live video is a problem, see live dash cam footage not loading.
Procurement rules. In 2022 the UK government told departments to stop installing Hikvision and other Chinese-made surveillance cameras on sensitive sites. That doesn’t apply to most private fleets, but if you hold public sector contracts, check whether your customers have a policy on it.
Water resistance. The G40 is IP4X and not waterproof. Fine behind a windscreen, but not for exposed mounting.
Which fleets suit which camera
Taxi and PHV. Either works. The KeepCam’s driver ID suits operators with lots of drivers sharing cars. The G40’s seatbelt and smoking detection suits operators with strict conduct policies. See our taxi and PHV page.
Car rental. The KeepCam’s driver ID and power-cut protection give it the edge for damage disputes. See our car rental page.
Vans. Either covers front, cabin and rear. For more cameras than that, look at the ProCam and its alternatives.
FAQ
Can the G40 use a normal SIM card?
No. Hikvision states the G40 requires an industrial SIM and won’t take responsibility for issues caused by standard SIMs.
Do both cameras support live view?
Yes. Both stream over 4G to a platform, and both create a local Wi-Fi network for setup.
Which is easier to install?
Both are single-unit installs wired to power and ignition. The KeepCam’s live preview in TCT helps get angles right. The G40 uses a mobile app for preview and settings.
Which one should you choose?
Pick the Hikvision G40 if you want a proven camera with a well-documented AI feature set and you’re comfortable with Hikvision’s platform requirements.
Pick the Teltonika KeepCam if you already use Teltonika hardware, want stronger crash power protection and driver ID, or need more inputs for security accessories.
See more options in our KeepCam alternatives roundup, or explore our dash camera options.
